UH-17T
| UH 17T Hovercraft Kit |
| The UH-17T features large cockpit with bench style seats perfect for bringing along the family. It uses an 16-27 hp lift engine and a Subaru engine for thrust. This craft can be built with or without a thrust duct. If built with a thrust duct it uses a 60-53 propeller. If built without the thrust duct it uses a 74-56 propeller. Click here to view the UH-17T hovercraft in our Builders Showcase |
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
UH-17T Hovercraft Kit Contents |
|||||||||||||||||||||||||||
| Engine Kit** 20 HP vertical shaft **Thrust engine sold separately Drive Component Kit Prop Shaft Assembly 74-56 pre-shaped propeller 7.25” prop hub (uses P1-1 1/2) P1-1 1/2" bushing (for 7.25" hub) 1 1/2" stainless steel keyed shaft (2) 1 1/2” pillow block bearings w/lock collars 10.75” dia. 8-groove Alum. Sheave (uses Q1-1 1/8 bush) Q1-1 1/2“ bushing (for 10.75 sheave) Lift Fan Shaft Assembly 34-23 pre-shaped lift fan 5.5” fan hub P1-1” bushing Engine Shaft Assembly and Belts 1 1/8” stainless steel keyed shaft (2) 1 1/8” pillow block bearings w/lock collars 6“ Everflex coupling half P1-1 1/8” bushing 4.1” dia. 8-groove Alum. Sheave (uses P2-1 1/8) P2-1 1/8” bushing (for 4.1" dia sheave) (2) 4GB3VX750 belt |
Hull Kit** 2 sheets of 2” foam 106 sheets of 1/8” plywood **Must be shipped by truck or by ocean. Hardware Kit UH-17T Plans 3 Gallon epoxy kit 2-pump kit 10 yards of 3.25 oz. Fiberglass cloth 7 yards of 6 oz. Fiberglass cloth 17 yards of skirt material 300 skirt screws ˝ pint HH-66 skirt glue 60’ Steering cable Options EA-81 Subaru engine - 85 HP EA-81 Subaru engine - 100 HP 7.25" backing plate for prop 5.5" backing plate for fan P Bushing Backing plate Tiny tach Upgrade to finished prop (in addition to drive kit) Upgrade to finished fan (in addition to drive kit) |
||||||||||||||||||||||||||
Click here to view the UH-17T hovercraft in our Builders Showcase |
|||||||||||||||||||||||||||
UH-17T Hovercraft Kits & Components