UH-16S
| UH 16P Hovercraft Kit |
| The UH-16S features a wide, spacious cockpit that can be enclosed and heated. The 16S is an excellent choice for hunting and fishing. A single engine provides both lift and thrust which increases reliability and reduces noise. The 16S uses many of the same drive components as the UH-18SPW. Click here to view the UH-16S in our Builders Showcase |
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
UH-16P Kit Contents |
|||||||||||||||||||||||||||
| Drive Kit Prop Shaft Assembly 60-44 pre-shaped propeller 18" long 1 1/4" diameter stainless steel keyed shaft (2) 1 1/4” pillow block bearings w/lock collars 10.75” diameter wood Sheave – 6-groove (uses P2-1 1/4" bushing) P2-1 1/4“ bushing (for 10.75" wood sheave) 7.25” prop hub (uses P1 -1 1/4") P1-1 1/4" bushing (for 7.25" prop hub) Lift Fan Shaft Assembly 34-28 pre-shaped lift fan 12" long 1” diameter stainless steel keyed shaft (2) 1” pillow block bearings w/lock collars 5.5” fan hub (uses P1-1" bushing) P1-1” bushing (for 5.5" fan hub) 9” aluminum sheave (uses H1 bushing) Engine Shaft Assembly 16" long 1 1/8” diameter stainless steel keyed shaft (2) 1 1/8” pillow block bearings w/lock collars 6-5-4 combo pulley (uses P1-1 1/8" bushing) P1-1 1/8” bushing (for 6-5-4 combo pulley) 4.7” diameter 6-groove aluminum sheave (uses P1-1 1/8" bushing) P1-1 1/8” bushing (for 4.7" 6-groove aluminum sheave) Everflex coupling half (uses P1-1 1/8" bushing) P1-1 1/8” bushing (for Everflex coupling) Keystock, Idler Components, and Threaded Keystock, Idler Components and Threaded Rods 12" of 1/4" keystock (for 1" lift fan shaft and 1 1/8" engine shaft) 6" of 5/16” keystock (for 1 1/4" prop shaft) (4) 7” idler pulleys 1 ft. 1/4-20 threaded rod 4 ft. 1/2-13 threaded rod 3 ft. 5/8-11 threaded rod Belts 6GB3VX500 belt thrust belt 5V3550 lift fan belt |
Hull Kit** 1 sheets of 1” foam 2 sheets of 2” foam 12 sheets of 3” foam 6 sheets of 1/8” plywood **Must be shipped by truck or by ocean. Hardware Kit UH-16S Plans 3 Gallon epoxy kit 2-pump kit 10 yards of 3.25 oz. Fiberglass cloth 10 yards of 6 oz. Fiberglass cloth 8 yards of skirt material 300 skirt screws ˝ pint HH-66 skirt glue 56’ Steering cable Options 7.25" propeller backup plate 5.5" lift fan backup plate P Bushing backup plate EA-81 Subaru engine - 85 HP EA-81 Subaru engine - 100 HP Finished Engine Mount Upgrade to Finished 60-53 Prop Upgrade to Finished 34-28 Lift fan Upgrade to Finished lift duct Finished thrust duct Gauge package (airspeed, oil pressure, water temp, tachometer) |
||||||||||||||||||||||||||
Click here to view the UH-14P in our Builders Showcase |
|||||||||||||||||||||||||||
UH-16S Kits & Components